Materials used in the production of modern interior doors
Today, interior doors are represented on the market of building materials by the widest assortment. Their diversity is not only in the models, but also in the materials from which the door leaves are made. The latest developments in this field are helping to produce more and more high-end materials for their manufacture. And today, in order to choose a door that meets all your requirements, you need to thoroughly understand the material from which it is made. Let's look at the most popular types of materials.The main material, as before, remains wood, which has a lot of advantages. But there are more than just advantages inherent in this material. Hygroscopicity is its main drawback, therefore, an array of wood for the manufacture of doors is increasingly being made from glued beams. It retains all the positive qualities of natural wood, but there are no disadvantages at all. Coniferous wood is used in the manufacture of glued products. The boards are thoroughly dried to the required humidity level of 8-12%. After that, each board is checked for defects, roughness, and the like. Then they are spliced into a spike and, after forming a geometric shape, glued together under pressure. The resulting glued beam is durable, does not deform, and is resistant to adverse effects. Even dry lumber - solid timber and planks, although they are not devoid of certain advantages, lose to glued ones in terms of mechanical properties. Products made of such a material are subsequently varnished.An even more durable material, LVL timber, is made from several layers of softwood veneer laid longitudinally and glued together. It has durability, moisture resistance and high load-bearing capacity. This magnificent material is often used as an alternative to metal structures.Despite a fairly decent set of positive qualities of wood products, more and more people are choosing doors with honeycomb filling. At the same time, the door leaf has a timber frame around the perimeter. The block is made of solid pine. And the voids remaining inside are filled with a honeycomb filler made of cardboard or pressed hardboard. Such a base gives the canvas lightness, strength and resistance to deformation. Then the frame is sheathed with MDF or HDF sheets. MDF is a particle board of medium density up to 870 kg/cubic meter.In simple terms, dry chips pressed in the form of a slab, treated with an additional binder. It has such characteristics as environmental friendliness, moisture resistance, resistance to various types of fungus and even fire resistance. HDF is similar to MDF, but it is produced by hot pressing and has a higher density of up to 1050kg/cubic meter. Accordingly, the quality characteristics of this material are much higher than those of MDF.In turn, MDF and HDF sheets can be lined with various types of coatings to give doors an aesthetic appearance: laminate, PVC film, veneer, and it is especially worth noting the eco-veneer doors, which are finished with the most modern material of the same name, which is polypropylene films based on natural veneer fibers with 2D and 3D effects.Laminate is a paper–laminated plastic with a melamine surface. It has established itself as a high-quality material used for interior door cladding. PVC coating is a thin synthetic film (polyvinyl chloride) that mimics the texture of wood with a number of advantages. Veneer is a plate with a thickness of no more than 2 mm, made of valuable wood species, and preserving the beauty of the natural material. To mask defects obtained during operation, the veneer can be varnished. Eco–veneer is the latest finishing material made from wood fibers and a binder. It has high-quality physical characteristics. A good alternative to natural veneer, but at a better price.Now you know not only the materials, but also the coatings used in the manufacture of interior doors. And what you choose is up to you. Visit slin-go&melbet for several fresh mirroring domains.